An electrical panel upgrade in Conyers, GA replaces an outdated or undersized main breaker panel with one that meets current code and can handle the loads modern homes actually put on it. If your panel is out of slots, running on 100-amp service, or flagged as a known problem brand, a panel upgrade is the fix. It is one of the most consequential electrical projects a homeowner can do, and it starts with a proper load calculation and a Rockdale County permit.
Conyers sits about 30 minutes east of Atlanta on I-20, and our crews make that run regularly. The housing stock here is genuinely varied: older bungalows and craftsman-style homes near Olde Town, ranch and split-level subdivisions from the 1970s through the 1990s spread across the county, newer construction filling in along the Salem Road corridor, and larger rural properties toward the county line. Each of those situations tends to arrive at the panel upgrade conversation from a different direction, and each one has its own wrinkles.
All Purpose Heating & Air Conditioning is a locally owned home services company. We have been doing this work for more than 35 years, and we are licensed and insured for residential electrical in Georgia. When you call us, you get a straight answer about what your panel actually needs, and then we give you an estimate before any work starts.
The panel does not usually announce itself until something goes wrong. Here are the situations we see most often in Conyers homes.
No open slots. Older ranch homes in the Honey Creek area and throughout the 1970s and 1980s subdivisions were built when a household ran a fraction of today’s electrical load. When a homeowner wants to add a dedicated circuit for a home office, a workshop in the detached garage, or a hot tub out back, there is simply nowhere to put it. A full panel is not a minor inconvenience. It is a hard stop.
100-amp service in a home adding new loads. A 100-amp service was standard for decades. It is not enough for a home that is adding an EV charger, a heat pump, or both. The math does not work, and the panel has to be brought up to handle it.
Federal Pacific or Zinsco panels. These brands are well documented as problematic. Breakers in these panels can fail to trip under fault conditions. If your home was built or remodeled between roughly the 1950s and 1980s, and especially if it is one of the older properties near Olde Town Conyers or Milstead, it is worth having the panel identified before you assume it is fine.
Breakers that trip under normal load, or signs of heat damage. Buzzing from the panel, breakers that trip when you run the dryer and the microwave at the same time, or any scorch marks or burning smell near the panel are not quirks to live with. They are the panel telling you something is wrong. Conyers winters can bring ice storms that stress the whole service entrance. That is not the time to find out your panel was already on the edge.
A panel upgrade is not just swapping a box on the wall. Here is the actual sequence of work.
Load calculation first. Before we recommend a panel size, we calculate what your home actually draws and what you plan to add. An EV charger, a new heat pump, a pool pump out at a property near Black Shoals Park, a workshop on a larger lot toward the county line: all of it factors in. Getting this right at the start determines whether the new panel serves you for the long run.
Permit with Rockdale County. We pull the permit. This is not optional, and any electrician who suggests skipping it is not someone you want working on your panel. The permit is what gets you a final inspection, and the inspection is what protects you when you sell the home.
Utility coordination. Georgia Power has to disconnect and reconnect service at the meter. We coordinate that scheduling. It adds time to the project, but it is a required step and we handle it.
Panel and breaker replacement, grounding and bonding. The old panel comes out, the new one goes in, and every circuit gets landed correctly. Grounding and bonding get brought up to current code at the same time. Depending on the age of the home, the grounding electrode system may need work as well.
What affects cost and timeline. The amperage of the new service, whether the service entrance conductors and meter base also need replacement, permit and utility fees, and any grounding upgrades all affect the final number. There is no honest way to quote this job without looking at it. That is what the estimate is for.
A panel upgrade often surfaces other electrical issues that were hiding behind the old box. Older homes near Olde Town Conyers and throughout Rockdale County’s mid-century subdivisions sometimes have aluminum branch circuit wiring, undersized circuits, or missing AFCI and GFCI protection that current code requires. Once the panel is open and the load is calculated, it is a natural time to address those items.
If you want to understand the full scope of electrical services we offer in this area, our Conyers electrician page covers everything we do for homeowners and commercial clients in Rockdale County. It is a good place to start if you are not sure whether a panel upgrade is your only need or just the first one.
For homeowners who want to go deeper on what a panel upgrade actually involves before calling, our electrical panel upgrade service page walks through the process in more detail, including what to expect at each stage of the job.
Panel upgrades also frequently go hand in hand with circuit-level work. If your home has circuits that are overloaded, improperly wired, or simply too few for how you live in the house now, our page on rewiring circuits in Conyers explains how we approach that work and when it makes sense to do it alongside a panel replacement.
Ready to move forward? Request your estimate and we will get a time on the schedule that works for you.
+
